- 📌【Ultra Large Print&Matrix Automatic Levelling】 300x300x400mm ultra large print volume. Auto measures 25 points across the print platform for heat bed leveling. An induction sensor can probe the bed in a grid and apply mesh-based compensation that ensures you print on a level bed every time, all without the time-consuming and labor-intensive leveling tasks.
- 📌【Filament Sensor&Power Outage Recovery】 The filament sensor detects the filament end and sends reminders to the screen to avoid air-printing. Resume printing and recover from exactly where it left off. No worries about unexpected power outages.
- 📌【Auto Filament Assignment&Assembled In No Time】 Automatic load and unload the filament with just a click.Pre-assembly and modular design with quick assemble in 10min. Solid Wire Connection,Distributor connector for solid wire connections.
- 📌【Dual Z-axis, More Accurate Print&Stable Y-axis Movement】 ET5 applies dual Z-axis rods and motors to make sure the smooth and accuracy of every slight movement. Dual Y axis guideway for a more stable and level moving stage of the build platform. Intuitive Touchscreen.Colorful LCD touch screen, allowing you to control the movement of X/Y/Z axis, leveling and printing with ease.
- 📌【Safe Designed Control Board】 You can connect your ET5 online or offline to any configuration for your convenience. You could print via SD card or USB flash drive. Self-developed industrial-grade 32bit control board with MCU STMF407. Stable operation with high precision. The mother board has thermal runaway protection. If the printer fails to detect the temperature for a certain time, it would automatically power off.
- Core XY structure design, full belt drive, higher stability and printing accuracy, ensure the quality of the model; Dual Z-axis design, increase the bearing capacity of the hot bed, reduce errors in printing, and print more finely.
- X5SA DIY assembly, providing complete parts and tools. The paper manual, SD card with an electronic version of the instructions and a link to the installation video. Assemble and debug by yourself, enjoy the fun of DIY assembly, possible to achieve unlimited innovation and transformation of appearance and performance, so as to meet your ideas and creativity. This process takes some time to install, debug and learn, which is quite challenging for novices, more recommended for experienced user.
- Silent motherboard and high quality power supply. TRONXY silent motherboard adopts German imported TMC ultra-quiet motor drive chip,allowing the printer always running at low decibels. 360W high-quality power supply, the power supply system is more stable and safe.
- Full functions, support Automatic leveling, Manual leveling, Filament detector, Power failure resume to print functions and other basic functions.
- If there is any questions when installing and using the 3D printer, you can contact us.TRONXY provides 1 year warranty and lifetime technical support and 24-hour professional customer service.In case of holidays, the after-sales service will reply asap on working days.(contact us: Your Amazon Buyer Account> Click Your Account> Your Orders> Find your order and click Contact Seller)
- 【Integrated Structure Design】Easy to assembly and maitain with integrated structure and modular design. All lines are concealed in the machine, It’s more convenient and safer for you to operate.
- 【Resume Printing Function】The machine can automatically resume printing after power-offer or filament breakage, saving time and avoiding waste.
- 【Semi-Assembled Kit】This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together.
- 【Removable Build Surface Plate】Auqila uses carborundum glass platform, enables the building platform heat up in 5 minutes and prints adhere better without the warping. Ultra smoothness even on the first layer.
- 【After-sale Service】All Voxelab 3d printers are provided lifetime technical assistance. If you have any questions regarding product operation or software please feel free to contact us.
- Filament detection that detects the filament end and sent reminder to avoid air-printing. 2.8-inch full-color touch screen for easy operation.You can upload your design and print it online or offline.
- Resume printing and recover from exactly where it left off. No worries about unexpected power outages. Automatic load and unload the filament with touch screen.
- 6 Screws + 3 Cables, modular design with quick assembly in 10min. Terminal pinboard design with integrated connection ports, covered wires and a more sleek appearance.
- Industrial grade chipset that allows more accurate, fast print. Protected with safety features like overcurrent protection, overload protection, over temperature protection, pre-over-temp alarm.Precision rollers on X and Y axis which reduces printing noise and provides ultra-high print resolution.
- Enclosed metal unibody design enables a more stable and reliable structure with compact size.Support personal turn features, including manually set up fan speed, print speed, heated bed and nozzle temperature.
- FAST HEATING & RESUME PRINT:The first heating bed takes only five minutes to reach the working temperature, and the heating speed is less than 3 minutes when used again. The printer's power supply can protect the printer from peak voltage and power outages. If the power is interrupted, printing can be resumed from the last layer, thus saving time and reducing waste.
- SMART & CONVENIENT : The 3.5-inch color touch screen equipped with the latest system makes offline printing very easy. The construction platform with steel ball balance structure inside, 4-point positioning and automatic leveling, make assembly faster.
- SEMI-ASSEMBLED KIT:This easy-to-install kit has been partially assembled, allowing you to understand the basic structure of the 3D printer after completing the assembly. Just install 6 screws, a flat cable can be quickly assembled.
- HIGHT PRECISION & RESOLUTION : The latest version of LETTON 3D Printer provides accurate printing with XY axis resolution of 0.0125mm, Z0.0025mm, and printing accuracy of 0.1mm.
- WARRANTY & SERVICE : We provide a one-year warranty for the whole machine (FEP and 2K LCD vulnerable parts 3 months warranty), if you have any questions about the product operation or software, please feel free to contact us，we will within 24 hours reply.
- REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
- RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
- SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
- WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.
- ☛ Ultra Silent Motherboard, The Ender-3 V2 built-in self-developed silent motherboard, which ensures smooth movement under 50DB. Therefore, when you print the model at night, please don’t worry, it will not disturb your rest.
- ☛ Effortless Filament Feed-in, The Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier, sometimes, the extrusion clamp is easy to be broken, so the rotary knob is a very friendly design.
- ☛ Carborundum Glass Platform, This platform enables the hotbed heat up quicker and prints adhere better without the warping, ultra smoothness even on the first layer. Which can easily realize rapid manual mold taking.
- ☛ Resume Printing Function, Resume printing function can resume printing from the last recorded extruder position after suffering unexpected power outages, saving your time and reducing filament waste.
- 【Satisfaction After-sale Service】We produce with meticulous and enthusiasm, we are sure you will love it, if not, we offer 90 days no questions replacement or money back.
- ✪【Excellent Mini 3D Printer DIY Kit】-The mini 3D printer has a print size of 100x100x100 mm, a PLA filament of 1.75 mm and an accuracy of 0.05 mm, which can provide smooth and vivid printing quality. It is suitable for beginners, children, teenagers to DIY projects ( Such as toys, artworks, handicrafts or samples.
- ✪【Fast Heating Mini 3D Printer】The 0.4mm nozzle of mini X1 Desktop 3D printer DIY kit reaches its operating temperature (180℃) in just 3 minutes. A high-quality power supply below 30W makes it super energy-saving and safe to use.
- ✪【Quick Assembly Diy 3D-Printers】-This 3D printer kit contains 3 main parts. According to our instruction manual, it only takes 5 minutes to complete the assembly. Note: If you cannot move the shaft of the printer, please check if the connecting cable is loose.
- ✪【Wide Application】The size of the product printed by this 3D printer is 100×100×100mm, small size, high printing accuracy, vivid image, suitable for children, teachers, offices, dormitories, classrooms, families, etc., and can also be used as exquisite gifts Give it to family and friends.TF card can dowload software and here are hundreds of printing models can choose,such as animals,bulidings,art crafts,etc.
- ✪【Ultra-quiet Mini 3d-Printers】This 3D printer kit is in a silent working mode below 60db, so you will not be disturbed by noise and irritable when working or sleeping. You can print out various artworks,handicrafts and samples, etc. according to your preferences.
- 【Auto Leveling 3D Printer】 High-precision leveling detector with matrix automatic leveling function frees you from bed leveling troubles. Finish data collection of 25 points within 5 minutes for automatic calibration.
- 【Resume Print Function】 LABISTS 3D printer can resume printing from the last recorded extruder position after suffering unexpected power failure or PLA filament outage, saving time and avoiding waste.
- 【Filament Detection Prompt】 When the filament detector detects that PLA filament is broken or runs out, the system automatically pauses printing and prompts for feeding. One-button automatically feeds and unloads filament with a touch screen.
- 【Fast Assembly】 LABISTS 3D printer comes with several assembled parts, install the bracket, the nozzle, connect few cables, only 3 steps to easily finish assembly for even beginners in just 5 minutes.
- 【Widely Compatibility】 LABISTS 3D printer supports PLA, ABS and HIPS filament, compatible with Windows * Mac systems, also supports TF Card & USB cable connection.
Many of the most talented artists, inventors and entrepreneurs struggle to re-create real-world objects with three-dimensional designs. For many professionals and hobbyists, fighting a drying or photograph delivers a sufficient idea of the concept being conveyed. But for those who develop innovative products that need to be held, viewed and touched by clients or customers, there is no substitute for a prototype.
It makes all the difference when making a presentation or conveying an idea. It provides a way for the client to make an emotional connection to your proposal while visualizing the illusion your painting as reality. An illustration on paper, no matter how detailed, simply cannot compete.
The problem that stands in the way for most people is the time and cost it takes to make rapid prototypes by hand or using machines. Not only can the timeline extend for a span of years, the cost can reach several hundred thousand dollars. But then, DIY 3D printers arrived, operating similar to inkjets but building up 3D models layer by layer. Even better, prototypes can be produced 10 times faster and at a fifth of the cost them before.
9. Robo R1 Assembled DIY 3D Printer
This do-it-yourself DIY 3D Printer is an upgraded model. It features enhance quality, consistency and overall performance. The filament feeding system has been upgraded to that it is easier to use and features a “quick release” that allows for rapid change out of the extruder.
This model also features nine point leveling system that is reset every time it initiates a print. No more do you have to adjust or re-level the bed manually or worry about misalignments. This is a larger model, measuring 63% larger than comparable models in its class, The build space measures 720 cubic inches, and features heated borosilicate glass.
Installed is the Hexagon All Metal Hot End software which empowers you to print with virtually any material you can find. And since it goes as high as 290c, the options are truly unlimited. Additionally, the printer is accompanied by 3D printing software is compatible with any CAD program. That means you can re-create any object you can find in a CAD program by simply uploading them to print.
8. Robo R2 Smart Assembled DIY 3D Printer with WiFi
This large 3D printer, featuring a 8″ x 8″ x 10″ build volume, is also one of the fastest printers on the 3D market, with Prince beads reaching 250 mm per second. Not only does this printer have mobile and Wi-Fi connectivity, it features a 5 inch color touchscreen which makes digital control efficient and simple. You can use any iOS device, establish a connection, and print right from your smart phone.
Robo R2 features an automatic self-leveling print bed, ensuring it works precisely. It is also removable and is finished with a buildtak surface which prevent slippage. This DIY 3D printer is compatible with more than 30 different materials such as carbon, wood, fiber, PLA and even metal infused materials. With the purchased additional extrusion head, Robo R2 can also prints materials simultaneously. It has a resolution of up to 20 microns, which your prints can contain exquisite details that the printer will achieve accurately every time.
7. New Matter MOD-t WiFi Desktop DIY 3D Printer
While elegant in nature, this is also a easy to use desktop DIY 3D Printer that is considered to be one of the most reliable machines on the market. It delivers the highest quality products while operating quietly, making it perfect for use in the classroom at school for for projects at home.
Teachers, students, homemakers, entrepreneurs and small business owners enjoy using this printer because it is quick to set up, easy to use, and provides the efficiency to produce her types that are exact. The printer is equipped with Wi-Fi capabilities which allows print jobs to be sent from your smart phone, tablet or even desktop computer.
One of the most intriguing features of this model is that the PLA filaments are eco-friendly, yet high quality and are available in a wide variety of vibrant colors. So not only is using this printer simple enough for a child or teenager, it is also very exciting to use.
6. QIDI TECHNOLOGY Dual Extruder Desktop 3D Printer 3DP-QDA16-01
This fully calibrated and completely flat the stop DIY 3D Printer guarantees that your materials will not warp during the heating process, which is always a big concern with 3D printers. For those who are looking for simplicity, reliability and precision, this is the model for you. This model features a dual extruder and features a turbo fan equipped with a cooling function.
The external frame, which was once plastic, is now metal, but high heat resistant so that it is capable of working with an expanded amount of materials – especially those that produce high heat levels. One of the coolest things about this is so is the software. It allows you to customize 3D models so that you can add a high level of detail and personalization to your creations.
5. LulzBot Mini Desktop DIY 3D Printer
If you are looking for the high-performance engineered DIY 3D Printer, you have found it. This simple and calibrated printer can be installed with an open source hardware. It offers opinion accuracy,’s flexibility and speed because it features collaborative technology, innovative software packages and experimental materials.
This model unleashes the potential to create extraordinary projects as it is highly adaptable, with the newest and best technology at your fingertips. Suitable for industrial printing, this model has the ability to print on nylon, polyester, ABS and polycarbonate filaments – all offer superior strength and a high level of resistance to temperatures and chemicals.
4. JGAURORA DIY 3D Printer Prusa i3
The heated bed of this DIY 3D Printer supports most 1.75 mm filaments such as CPU, wood, ABS, nylon and PLA. This model features a LCD control screen, 8 GB is the car as well as USB cable, permits online and off-line print. The T-type screw right linear stepping over delivers exquisite accuracy. And when coupled with its all metal frame and design, the printer is both consistent and durable.
The stability of the performance makes this printer a great option for school age children. Now teachers can inspire their students to create mechanical, sculpture, robotic and even industrial designs that brings to life their creative imagination. The uniform motion, and high quality linear bearings ensure that the machine operates smoothly and quietly, which means that it won’t be a distraction in the classroom.
3. ALUNAR 3D Desktop Printer Prusa i3
ALUNAR 3D Printer is suitable for the more experience artists. It requires a high level of practicality, passion and patience. While simply requires a sense of consciousness, the rigid quality control standards used to design this kit produces a machine that delivers excellent quality performance.
Its extruder is capable of withstanding a wide range of temperatures, so the list of filaments that are compatible with this unit is expensive. From the most basic material such as PLA and ABS, to the advanced filaments such as would and conductive PLA, engineers, architects, designers and hobbyists can create truly unique prototypes that are detailed and of high quality.
2. FLSUN DIY 3D Printer Delta Kossel Diy Kit
FLSUN DIY 3D Printer consists of a heated bed, dual fans for both the cooling system and the Effector. It also has micro USB and micro SD car connectivity, an extensive list of software compatibility and an LCD display. This economical unit is affordable, yet because its’ construction meets European design standards, it is highly durable.
When purchased, the DIY kit is complete, and there is no need for any additional accessories. FLSUN has a one-stop service for all your 3D printing needs though you don’t have prior knowledge about 3D printing.
1. XYZprinting da Vinci Jr. 1.0 DIY 3D Printer
The LCD control panel of XYZprinting can calibrate and adjust the print bed. This eliminates the need for three not calibration. While this model can only print on XYZprinting’s PLA filament, the materials are bio-compostable and non-toxic. These materials are also DEHP and Heavy Metal-free. So this printer is perfect for environmentalists or those looking for eco-friendly option.
You do not have to sacrifice quality or performance. It features a fluid press release extruder for quick and easy cleaning, fully enclosed designed and a non-heat print tray. Not only is this DIY 3D Printer safe to use, it is sturdy and offers high-quality printing.
Last update on 2021-01-22 / Affiliate links / Images from Amazon Product Advertising API